23 3/4”x38 1/2” Reclaimed 1970s Painted Pine Two Panel 1 Over 1 Internal Door

This internal 1970s two panel door is painted yellow and blue
It’s made from pine with ply panels and is in used condition
It has some old nail or screw holes, some minor damage and some scratches & marks
There are some old 1970s panel pin holes
The door has some flaking paint and would benefit from a sanding (see photos)
It is beaded on both sides of the door
The panel layout is 1 over 1
There are remains of old hinges
It could also be used as a cupboard door
It could be cut down in height and width**
As well as the description we have taken 12 pictures, please look through them in detail

Measurements:
Door Height: 98cm or 38½”
(**The height could be cut down by 4cm. 2cm off the top, 2cm off the bottom, which could make the height as low as 94cm or 37 inches)
Door Width: 60.5cm or 23¾”
(**The width could be cut by 2cm, which could make it as narrow as 58.5cm or 23 inches)
Door Thickness: 3.4cm or 1¼ inches

Note: Inches are rounded down to the nearest ⅛
Approximate Weight: 10kg or 22lbs
Approximate Age: 1970s

The door has no hinges but we do have lots of old hinges in stock that may fit this door, please get in touch if you need some.
We offer a paint/varnish stripping service, please get in touch for a quote if you require this.
We can also apply a new finish, e.g. wax